CTB-44 Toolboard
High temperature, long life and easily machined for smooth surface finishes
CTB-44 is manufactured by CMT Materials for a wide variety of vacuum forming applications. It is suitable for use up to 250F (121C). CTB-44 utilizes a copolymer base material and smaller cell structure than most boards, providing improved mechanical properties and a smoother surface finish.
- Excellent machinability
- Superior edge definition
- Good dimensional stability
- Outstanding surface finish
Typical Properties
Color | Blue-Gray |
Density (ρ) | 44 lb/ft3 [704 kg/m3] |
Hardness | 80 Shore D |
Flexural Strength | 6470 psi [44.6 Mpa] |
Flexural Modulus | 334,000 psi [2300 Mpa] |
Compressive Strength | 8,010 psi [55.2 Mpa] |
Compressive Modulus | 290,000 psi [2,000 Mpa] |
Coefficient of Thermal Expansion (CTE) | 22 x 10-6 in/in°F [40 x 10-6 m/m/°C] |
Available Sizes
1.0” x 24 x 26 [25mmx610x660] | 1.0” x 24 x 60 [25mmx610x1524] |
1.5” x 24 x 26 [38mmx610x660] | 2.0” x 24 x 60 [38mmx610x1524] |
2.0” x 24 x 26 [51mmx610x660] | 3.0” x 24 x 60 [76mmx610x1524] |
2.5” x 24 x 26 [64mmx610x660] | 4.0” x 24 x 60 [102mmx610x1524] |
3.0” x 24 x 26 [76mmx610x660] | |
3.5” x 24 x 26 [89mmx610x660] | |
4.0” x 24 x 26 [102mmx610x660] |
Applications
CTB-44 is an excellent choice for constructing forming tools, master models, fixturing and other heat resistant applications. It may also be used for composite fabrication in pre-preg and autoclave cure, wet lay-up, vacuum infusion and other composite processes.