RAMPF® SB-0130

Polyurethane Board for Styling & Design

Key Properties of Rampf SB-0130 include:

  • Very light weight with good surface structure
  • Easily shaped
  • Good heat resistance
  • Resistant to organic solvents

Typical Properties

ColorLight Yellow
Density (ρ)8.0 lb/ft3 [0.13 g/cm3]
Flexural Strength348 psi [2.4 MPa]
Compressive Strength218 – 290 psi [1.5 – 2 MPa]
Coefficient of Thermal Expansion (CTE)(28) x 10-6 in/in°F [(50) x 10-6 m/m/°C]

Available Sizes

2.0” x 24 x 96 (50.8mm x 610 x 2438.4)
4.0” x 24 x 96 (101.6mm x 610 x 2438.4)
6.0” x 24 x 96 (152.4mm x 610 x 2438.4)
8.0” x 24 x 96 (203.2mm x 610 x 2438.4)

2.0” x 48 x 96 (50.8mm x 1219.2 x 2438.4)
4.0” x 48 x 96 (101.6mm x 1219.2 x 2438.4)
6.0” x 48 x 96 (152.4mm x 1219.2 x 2438.4)
8.0” x 48 x 96 (203.2mm x 1219.2 x 2438.4)

Safety

Good workplace ventilation is to be ensured during processing. At the same time, the employer’s liability insurance association’s industrial hygiene safety regulations regarding the handling of reaction resins and their hardeners are to be observed. Please take heed of the appropriate safety data sheets.

The material should be stored flat and in a dry place. Temperature variations should be avoided during storage and transportation.

The product should be machined at ambient room temperature (68-77°F (20-25°C)).

Applications

  • Design Study
  • CNC program checking
  • Supporting structures for tooling pastes
  • Negative mold for casting